Saturday, November 17, 2012

How to Build a Fountain


How to Build a Fountain

How to Build a Fountain
There are several choices when it comes to constructing fountains. From small to large, all fountains have the same purpose and need basically the same materials. To create a fountain you will need: a tubing, a water pump, and a few basic tools. Fountains are fairly easy to build and do not require much skill.
As with many things you build, you will need to find a suitable location for the fountain. There needs to be a power source nearby to support the water pump. For a simple fountain, you will need two flower pots. The pots can be arranged in many ways but the most common is one tipping over on the lower pot to create a waterfall effect. The water pump will need to be placed in the reservoir pot and connected to a heavy material with twine or a rubber band. To create a custom filter for the pump, simply cover the pump with mesh, pantyhose will work fine.
Next you will need to connect the tubing with the water pump and have the tubing come through the reservoir and into some chicken wire. This wire will act as the reservoirs lid so that you can load any decorative stones to the top of the fountain. Cover up the water pump with flowers or any other materials you think would look good with the fountain.
Now you need to dig the second pots base. Have the tubing run through the pots drain hole and have it sealed with a type of rubber fill or putty. To cover the appearance of the tubing, pebbles can do the job, if placed correctly. Once all of the pots are set up, fill up your reservoir and make sure the pot has water in it before you turn on the water pump. Now all you have to do is make sure all of the rocks and pebbles are placed correctly so the fountain does not end up overflowing.

No comments:

Post a Comment