Hi, in this tutorial I will show you how you build a belt buckle from an old board.
Step 1:
Tools you need:
- Hot Glue Gun
- Hobby Knife
- Dremel Tool
- Hot Glue Gun
- Hobby Knife
- Dremel Tool
Step 2:
Materials you need:
- a Bucke Belt
- a piece of Iron Rod
- a Screw with Nut
- a piece of Foam
- a Bucke Belt
- a piece of Iron Rod
- a Screw with Nut
- a piece of Foam
Step 3:
Sets the board on the foam and cut around the outside.
Step 4:
Make a hole in the middle of the board with the Dremel Tool.
Step 5:
Puts the screw into the hole and fastened with the nut.
Step 6:
Forms a bow from the Iron Pipe and glue it on the Board.
Step 7:
Now glued the piece of foam on the back of the board.
Step 8:
That's it, we're done.
Here is the finished belt buckle.
Here is the finished belt buckle.
No comments:
Post a Comment